|
Home
About us
Kelso
Carlisle
Hexham
Perth
Musselburgh
Newbury
Newmarket
Doncaster
Ascot Ayr
Plumpton
Catterick
Aintree
Thirsk
Hereford
Hamilton
York
Newcastle
Windsor
Haydock
Specifications
Contact |
|
Ground
Floor |
|
32x100mm pressure treated
wall plate. 45 or 38mm pressure treated joists, x-cut as shown on joist
layout. Stainless steel herringbone dwangs where required (1 row over
2500mm & 2 rows over 4500mm). 150mm glass
fibre insulation on netlon support mesh. Joist hangers where applicable.
V313 grade chipboard flooring
2400x600mm sheets, 18mm for joists at 400mm centres. 22mm for joists at
600mm centres. |
| |
|
|
|
Mid
Floor |
|
Floor joist as bottom chord
of attic truss @ 600mm centres (where applicable), V313 grade chipboard
flooring 2400x600mm sheets, 22mm thick. Stainless steel herringbone
dwangs where required.
Floor joists, two storey (where applicable), 38x195mm or as requested by
engineer, pressure treated joist, x-cut to length as shown on joist
layout at 400mm centres, V313 grade chipboard flooring 2400x600mm sheets
18mm thick. |
| |
|
|
|
External
Walls |
|
45x95mm pressure treated
studs, top & bottom rails factory assembled with lintol openings where
required. 9.5mm OSB sheathing factory fItted to panels, Corovin breather
paper factory fixed to external wall panels with stainless steel
staples. Additional studs to facilitate plasterboard fixing at internal
corners. 45x95mm pressure treated head binder for site fixing. 17mm
Celotex insulation board for site fixing. 1 layer 2400x120Ox12.Smm
tapered edge plasterboard for site fixed internal sheathing. Stainless
steel wall ties c/w stainless steel annular ring nails for site fixing.
Galvanised holding down straps for site fixing by others. 38xSOmm
pressure treated cavity closer for site fixing. |
| |
|
|
|
External
Doors |
|
Choice of Composite front &
rear doors, glazed with clear or obscure glass, complete with 3 point
locking system. Please note doors are primed only, for site finishing. |
| |
|
|
|
Windows |
|
High performance white upvc
casement windows, double glazed with lowE glass, gold handles & spacer
bar. |
| |
|
|
|
Internal
Walls |
|
4Sx70mm studs, top & bottom
rails factory assembled with openings as required. 45x70mm dwangs
factory fitted through centre of panel. 70mm insulation to bathroom
walls. |
| |
|
|
|
Roof |
|
Trussed rafters to BSS268
part 3, at 600mm centres generally. Truss clips for site fixing to head
binder I wall plate. Girder truss shoes for site fixing. 22x100mm
pressure treated truss bracing in full lengths for site fixing. 9.Smm
OSB sheathing. 14x3Smm pressure treated counter batten. Reinforced
under-slating felt to BS747 type 1 F (boarded roofs) for site fixing.
38x2Smm pressure treated tile batten, in random lengths for site fixing.
19Sx21m pressure treated fascia board, for site fixing. 145x21mm
pressure treated bargeboard, factory fitted to gable ladders. Pressure
treated jack rafters in lengths for site cutting & fixing. 9.Sm CSP
plywood fascia capping for site fixing of bellcast Marine ply soff"lt
board. Chipboard water tank platform with pressure treated bearers &
spreaders as required for site fixing (if required). Soffit vent to give
cross flow ventilation. 38xSOmm pressure treated ceiling dwangs for site
fixing. 3Sx70mm pressure treated spandrel plasterboard runner for site
fixing. 2400x1200x12.Smm tapered edge plasterboard for site fixing.
2S0mm glass fibre insulation in packs of 7 sq m split to suit truss
centres for site fixing. |
| |
|
|
|
2nd Fix
Joinery |
|
Insulation for under floor,
walls & ceilings, plasterboard & flooring see relevant section above.
12Smm coving to lounge & dining room.
Insulated loft hatch. |
| |
|
|
|
3rd Fix
Joinery |
|
Internal doors, pre-finished
sapele or 6 panel moulded hardboard doors primed for site finishing,
factory fitted in softwood frames with brass loose pin hinges. Brass
tubular mortice latches, factory fitted to pass doors as required, brass
turn button locks, factory fitted to bathrooms, en-suites & WC as
required. Victorian Style brass lever furniture supplied loose for site
fixing. Wardrobe doors, hinged as internal doors. Shelves & wardrobe
rails as required, for site fixing. Cupboard doors with brass knob
handles & roller catches to suit
Stair, where applicable, softwood treads & stringers, plywood risers,
turned spindles & square newels. .
16x70mm ogee facing, 16x9Smm ogee skirting, 1Sx70mm curtain plate,
19x14Smm window cills, 16x40mm ogee window apron, all in red pine. |
| |
|
|
| |
|
Home |
|
|